Ibm B50 Bedienungsanleitung PDF herunterladen (Seite 66)

Press Enter when you are finished; you must type the password again for

verification.

If you type the password incorrectly, press the Esc key and start again.

Note: If an error occurs when you attempt to set the privileged-access password,

then make sure the password-enabling jumper has been changed. (See

Chapter 4, “Installing and Removing Options” on page 4-1 for instructions on

changing the password-enabling jumper.)

After you have entered and verified the password, the privileged-access password

icon flashes and changes to the locked position to indicate that your server now

requires the password you just entered before running system programs.

Attention:

1. Once the password-enabling jumper has been changed and the

privileged-access password has been set, great care must be taken to preserve

the privileged-access password.

If you set the privileged-access password and

later misplace it, your server must be returned for service.

To prevent loss of system use, record the privileged-access password

immediately whenever it is changed.

2. If no user-defined boot-list exists, and the privileged-access password has been

enabled, you are asked for the privileged-access password at startup every time

you boot your server.

Moving the password-enabling jumper back to the default position does

not

disable

or erase the privileged-access password. Removing the jumper or moving the

jumper back to the default position only prohibits changing or disabling this password

with the System Management Services.

3-14 7046 Model B50 User's Guide

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 220 221

Keine Kommentare

Ibm B50 Bedienungsanleitung Seite 66