Ibm B50 Bedienungsanleitung PDF herunterladen (Seite 104)

3. To enable or change the privileged-access password, first touch the metal frame

of the server, then gently pull upward on the small box (jumper) covering the

pins. Replace the jumper so that it covers the rear two pins instead of the front

two.

4. To set the privileged-access password, you must first install all other options

(such as internal drives, memory, adapters) if you are planning to install them

now. After you have installed these options, replaced the cover, and reinstalled

the server in the rack, start the System Management Services to set the

privileged-access password. For more information on the System Management

Services, see Chapter 3, “Using System Management Services.”

What to do next?

To enable or disable:

 The privileged-access password, go to page 4-11.

 The automatic power-up feature, go to page 4-13.

 The power-on password, go to page 4-8.

 The external SCSI connector, go to page 4-33.

To install:

 A memory module, go to page 4-16.

 An adapter, go to page 4-23.

 An internal drive, go to page 4-29.

 A new battery, go to page 4-36.

To remove:

 An adapter, go to page 4-26.

 A memory module, go to page 4-20.

 An internal drive, go to page 4-29.

To complete the installation, go to page 4-39.

4-12 7046 Model B50 User's Guide

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 220 221

Keine Kommentare

Ibm B50 Bedienungsanleitung Seite 104