Ibm B50 Bedienungsanleitung PDF herunterladen (Seite 105)

Enabling Automatic Power-Up

Before you begin:

 Read “Safety Considerations” on page 4-2 and “Handling Static Sensitive

Devices” on page 4-3.

 Remove the server cover (see “Removing the Cover” on page 4-4).

Your server can be set to automatically turn on as soon as AC power is applied.

This allows unattended restart after AC power has been interrupted by a power

outage, for example.

When the automatic power-up capability is enabled, the server turns on as soon as

AC power is applied, even if the server was not turned on before the interruption.

Your server arrives from the factory with the automatic power-up feature disabled.

Note: If the power-on password is set, then the server still turns on but does

not

boot unless the Remote Mode is enabled. To set the power-on password

and Remote Mode, see Chapter 3, “Using System Management Services.”

To enable the automatic power-up feature, do the following:

Chapter 4. Installing and Removing Options 4-13

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 220 221

Keine Kommentare

Ibm B50 Bedienungsanleitung Seite 105