IBM THINKPAD A22 Bedienungsanleitung PDF herunterladen (Seite 26)

Message Solution

EMM386 Not Installed—

Unable to Set Page

Frame Base Address.

Edit C:\CONFIG.SYS and change a line from

device=C:\WINDOWS\EMM386.EXE RAM

device=C:\WINDOWS\EMM386.EXE NOEMS

and save this file.

CardBus Configuration

Error—Device Disabled

Press F1 to go to the IBM BIOS Setup Utility. Press F9 and then Enter to

load the default setting.

Press F10 and then Enter to restart the system.

Errors without messages

Problem: When I turn on the machine, nothing appears on the screen and the

machine does not beep while starting up.

Note: If you are not sure whether you heard any beeps, turn off the

computer; then turn it on again, and listen again. If you are using an

external monitor, refer to External monitor problems.

Solution: If a power-on password is set, press any key to display the

power-on password prompt, and then type the correct password and press

Enter.

If the power-on password prompt does not appear, the brightness control

lever might be set to minimum brightness. Adjust the brightness level by

pressing Fn+Home.

If the screen still remains blank, make sure that:

v The battery is installed correctly.

v The ac adapter is connected to the computer and the power cord is plugged

into a working electrical outlet.

v The computer power is on. (Turn on the power switch again for

confirmation.)

If these items are properly set, and the screen remains blank, have the

computer serviced.

Problem: When I turn on the machine, nothing appears on the screen, but I

hear two or more beeps or a continuous beep while starting up.

Solution: If you are using Ethernet:

v Make sure that the Ethernet cable is connected firmly.

Solving computer problems

ThinkPad

A22 Service and Troubleshooting Guide

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 81 82

Keine Kommentare

IBM THINKPAD A22 Bedienungsanleitung Seite 26