Ibm THINKCENTRE 8123 Bedienungsanleitung PDF herunterladen (Seite 30)

Notes:

a. Notice of the orientation of the notches 1 on the microprocessor. This is

important when reinstalling the microprocessor on the system board.

b. Do not drop anything onto the microprocessor socket while it is exposed.

The socket pins must be kept as clean as possible.

6. Make sure that the microprocessor retainer is fully open.

7. Loosen the protective cover 3 that protects the gold contacts on the new

microprocessor 2 but do not remove it. Use the vacuum pen 1 to pick up

the microprocessor then completely remove the cover.

8. Position the microprocessor so that the notches on the microprocessor are

aligned with the tabs in the microprocessor socket.

22 Hardware Replacement Guide

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Keine Kommentare

Ibm THINKCENTRE 8123 Bedienungsanleitung Seite 30